Tie-dye is all the rage as summer approaches, and with 90’s fashion growing increasingly popular among TikTok’s Gen Z producers, it’s hardly surprising. If you’re anything like us and spend hours scrolling through TikTok, you’ve undoubtedly come across a few instructions on how to obtain the perfect tie-dye t-shirt or even sneakers! In this post, we’ll walk you through the many procedures used by Tie Dye clothing shops to obtain the desired outcome.


This post will show you how to tie dye like a master using several tie-dye techniques, but first, here are some tie-dye essentials to help set you up for success! Whether you want to learn how to tie dye a T-shirt, how to dye socks, or how to dye anything else, here are the fundamentals by a tie-dye clothing shop to get you started.

List of Materials:

  • Plastic Gloves
  • Rubber Bands
  • Easy-squeeze bottles with dye powder
  • Sealable plastic bag or wrap (for storing your t-shirt while the dye sets)
  • Disposable surface cover (like a large trash bag)
  • Wire Rack (to avoid your creating from sitting in a pool of dye)

Step 1: Pick your Item

Tie-dye goods should be produced entirely of natural fibers like cotton, rayon, or silk. Because synthetic fabrics, such as polyester, contain different fibers that are not as absorbent, it is critical to wash the item before beginning the tie-dying process. 

Other dyes need presoaking the cloth in soda ash, but Tulip’s One-Step Dyes already have the soda ash incorporated in. 

When pre-washing clothing, avoid using fabric softener since it might inhibit dye absorption.

Step 2: Prep the Dye

Some solutions, such as Tulip’s One-Step Dye bottles, already contain the powder, but if you’re using a different sort of dye, now is the time to get it ready. Fill your easy-squeeze bottles with powder, then fill them with tap water, making sure your nozzle is properly screwed in and the lid is on. Each container should be carefully shaped until the color powder has been dissolved. Don’t mix your dyes until you’re ready to use them.

  Step 3: Bind the Item

Place your damp garment or t-shirt on a level surface that has been coated with plastic. As an example, using a t-shirt using the spiral approach, locate the center of the tee, which is down the middle of the collar, and the part right under the arms. 

It is the spiral’s central point.

Squeeze the cloth in the center and twist it to the right until the entire shirt is bunched up, forming a beautiful swirl. By crisscrossing the rubber bands and making 6 wedge shapes, you can keep the spiraling t-shirt in place.

Step 4: Apply the Dye

Place the t-shirt on the metal rack over a covered area to avoid making a mess. Apply the dye colors to each wedge made by the rubber bands while wearing gloves. To match the colors on the front, flip the t-shirt over and apply the same colors on the reverse.

Step 5: Let Set

It is the most time-consuming stage since you will need to let your product set for many hours. Put your creation in a sealable plastic bag or cover it in plastic wrap to keep it moist and allow the dye to settle. Let your project sit for 6 to 8 hours, or overnight if you have the time. The cloth must remain moist while the dye sets, so keep it in a cool place.

Step 6: Rinse and Wash

Remove the rubber bands and rinse, wash, and dry after at least 6 hours and the color has fully processed. We recommend air drying it or following the washing directions on the t-shirt tag.


Spiral Tie Dye Pattern

It is one of the most prevalent techniques, and if you’re just getting started, it’s an excellent place to start. This technique is simple: grab the middle of the cloth and twist it to form folds, then strategically bind it with rubber bands before adding the dye.

The Reverse Techniques 

This technique is all about the way the fabric is folded, using a t-shirt as an example. Accordion folds the t-shirt from the bottom edge up towards the collar of the shirt in even folds. Wrap rubber bands tightly around the folded shirt in each direction, crisscrossing the rubber bands. Place the folded t-shirt on the rack and squeeze the dye into the fabric on each side. For this technique, indigo blue color dye is usually used.

The Shibori Tie Dye Pattern

Using a t-shirt as an example, this method is all about how the cloth is folded. Fold the t-shirt accordion style from the bottom edge up towards the collar in even folds. Wrap rubber bands securely in each direction around the folded shirt, crisscrossing the rubber bands. Squeeze the dye into the cloth on either side of the folded t-shirt on the rack. Indigo blue dye is commonly used for this procedure.

The Ice Dye Technique

The crumple tie-dye pattern is the most common for this method, which requires real ice. To begin, dampen the cloth in soda ash or Tulip One-Step dye and put it down flat on a covered work table. After binding the cloth with elastic bands, lay it on a rack and cover it with ice. Sprinkle colored powder over the ice once it has been covered in ice. Depending on the temperature, it might take a long time or not at all for the ice to melt.

The Dip-Dye

Dip-dyeing (also known as tip dyeing) is a dyeing process in which the ends of the cloth are dipped into dye. Dip one side of the cloth into the first color and squeeze off any excess dye. Wrap the cloth in plastic wrap and place it flat on a rack for 6 to 8 hours. Rinse, wash, and dry well.

Want to buy tie-dye clothes? At Shop Sun Chasers, you can find a range of tie-dye clothing online.

Read also more information

Leave a Reply

Your email address will not be published. Required fields are marked *